İçməli suyun evlərə və ofislərə çatdırılması
az ru en


200GPD (gallons per day)
Light Commercial Reverse Osmosis Water Systems

Small in size, but big in performance

High Capacity Reverse Osmosis System

A high capacity, low cost system. Perfect for offices or small factory. Designed for commercial and residential application. It is suitable for manufacturing, restaurants, food processing industries, shopping centers, schools and hotels.

Provides high quality drinking water with capacity up to 200 gallons per day. HRO-200 can be installed with large tank (11G or 20G water storage tank) for maximum output, while taking up minimum space.

System is equipped with High Flow Booster Pump for increased water production capacity.


200 Gallons Per Day Membrane x 1
High Flow Booster Pump
Small in size, but big in capacity.
FDA Approved Polypropylene Made Flat Cap Housings.
Comes with attractive designer faucet
Build in electrical shut off valve to prevent any damage of the membrane.
All hardware included
Completely Assembled, 100% Factory Tested and Sterilized Ready for Installation.


HRO-200 - cartridge filters

(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.

(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.

(Stage 3) Block Carbon Filter :
Carbon block filter provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.

(Stage 4) Reverse Osmosis Membranes:
200 Gallon Per Day Membranes are now available in residential sizes. Designed to perform in operating conditions similar to most standard under-the-counter home RO units, the TW30-1812-200 forms a tight fit in most standard residential housings.

(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.


HRO-200 Specification:

Production: 200 GPD / 756 LPD Permeate flow rate and salt rejection based on the following conditions: 200 ppm softened tapwater, 77°F (25°C), 50 psig (3.4 bar) and 15% recovery.
Operation Pressure : 10 - 80 psi
Available in : 220V (50 Hz)
Weight (System) : 17 kg
Dimensions: 38.0 (L) x 25.5 (W) x 46.0 (H) cm 

HRO-200 can be installed with large tank (11G or 20G water storage tank) for maximum output.

təkər kreditlə təkər continental baku michelin baku təkər satışı təkərlər